Thermal shock lipolysis therapy works via an innovative, new technology called Thermal Shock lipolysis. It works by a process called thermal contrast lipolysis which uses a combination of hot and cold temperatures to target fat cells.
Thermal shock therapy combined two sources (Cryolipolysis and Hyperthermia), as a global and broad-spectrum response to compared to the other cryolipolysis systems available today on the market, The target area is treated with a triple thermal shock of heating – cooling- heating, applied for a specific duration by using sophisticated automated software in a dynamic, sequential and temperature controlled manner.
The procedure takes starts with the temperature at 43℃ for approximately 10 minutes heating action to “Liquefy” the fat cells. Following the initial heating, A cooling at the temperature of -2℃ for 35 minutes to induce cell death, In the last step, the target tissue is warmed again at 43℃ to optimize the treatment.
Clinical proved that approximately 10% more fat cells are destroyed in a Thermal-Shock treatment compared to typical fat freezing procedures.
360-degree full range of cooling and heating, freezing at minus 10℃ to positive 45℃ heating, 4 groups cycle modes for operation, parameters can be set flexibly; 8 pcs different sizes cryo handles are suitable for different size areas and body shape.
The fat tissue is positioned into a special transducer and subjected to a triple thermal shock (heat – cold – heat) according to very precise time, speed, temperatures and energy rates protocoles and piloted automatically through several softwares.
THE EFFECT AND CONSEQUENCES
The effect produced is almost immediate. Some fat cells are disabled during the session while others will be eliminated within 2 or 3 weeks.
After only one session, more than 30% of the treated fat tissue can be eliminated. According to those datas, Thermal shock therapy implies aprox. 33% results improvement compared with normal cryolysis procedure.
Rapid results: aprox. 80% of the final result available within 20 days.
360-degree cooling applicator with a 100% cooling effective surface, ensuring that the cooling effective area covers more than two cryo plates of other cryolipolysis machines. The excellent management of the cooling allows a shorter session with a high patient satisfaction rate.Up to 2 applicators treat simultaneously allows maximum flexibility Complete body remodeling by various shapes and sizes of applicators Shorten treatment time by half: 35 minutes only. You can treat more patients and get more revenue.
Replaceable Contours
10 different replaceable contours for optional
The creative concept of a cooling applicator makes it possible to exchange different types of cooling contours easily without buying an extra applicator
Different contours Versatile for multiple area treatments, including the hips, flanks, midsection, thighs, and back. The applicators are even effective in hard-to-reach areas like bra bulges and the upper arms
| Power supply mode | AC220V±10% 50HZ |
| Rated power | 1500W |
| Negative pressure | 0-80Kpa |
| Cooling | -10 to ~+45℃ |
| Laser power | 100mw/pcs |
| Cavitation frequency | 40KHz |
| RF freequency | 5MHz |
| Cryo Quantity |
5 pcs |
| Coolant | Purified water or special coolant Ambient |
| temperature |
5℃-40℃ |
| Relative humidity | ≦80% |
| Touch screen |
10.4 inches |
| Packing size |
115*65*58cm
|
| GW | 74kg |
